Sharp XL-MP130 System connections continued, AC power connection, Demonstration mode

XL-MP110E

System connections (continued)

Preparation for Use

AC power connection

After checking all the connections have been made correctly, plug the AC power lead of this unit into the wall socket. If you plug in the unit first, the unit will enter the demonstration mode.

		ANTENNA	AM
		FM	LOOP
		75 OHMS
			VIDEO/AUX
				IN
			RIGHT	LEFT
	RATED SPEAKER IMPEDANCE:
	6 OHMS MIN.
AC INPUT	SPEAKERS
	RIGHT	LEFT	SUBWOOFER
				PRE-OUT

Wall socket

(AC 230 - 240 V, 50 Hz)

Notes:

The unit will start the tape initialisation when plugged in to the wall socket. During this process, initialising sound will be heard and the unit cannot be turned on. Wait until the process is finished.

Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.

Cooling fan:

This main unit is built with a cooling fan at the rear of the unit for improved cooling. Please do not cover the opening of the fan with any obstacles, as this will block proper ventilation.

			VIDEO/AUX
				IN
			RIGHT	LEFT
	RATED SPEAKER IMPEDANCE:
	6 OHMS MIN.
AC INPUT	SPEAKERS
	RIGHT	LEFT	SUBWOOFER
				PRE-OUT

Demonstration mode

The first time the unit is plugged in, the unit will enter the demonstration mode. You will see words scroll.

To cancel the demonstration mode: When the unit is in the power stand- by mode (demonstration mode), press the X-BASS/DEMO button. The unit will enter the low power consumption mode.

To return to the demonstration mode:

When the unit is in the power stand-by mode, press the X-BASS/ DEMO button again.

Note:

When the power is on, the X-BASS/DEMO button can be used to se- lect the extra bass mode.

External FM aerial

Use an external FM aerial if you require better reception. Consult your dealer.

ANTENNA AM

LOOP

FM

75 OHMS

External FM aerial

10