XL-MP110E

General control

Basic Operation

12

/

To turn the power on

Press the ON/STAND-BY button to turn the power on.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.

To change the display brightness

You can switch the display brightness by pressing the CLEAR/ DIMMER button more than 2 seconds.

Volume auto fade-in

If you turn off and on the main unit with the volume set to 27 or higher, the volume starts at 16 and fades in to the last set level.

Volume control

Main unit operation:

When the VOL +/- control is turned clockwise, the volume will increase. When it is turned anti-clockwise, the volume will decrease.

Remote control operation:

Press the VOLUME (+ or -) button to increase or decrease the volume.

0

.....

30 MAXIMUM

 

Bass control

When the power is first turned on, the unit will enter the extra bass mode which emphasises the bass frequencies, and "X-BASS" will appear. To cancel the extra bass mode, press the X-BASS/DEMO (X-BASS) button.

Equalizer

When the EQUALIZER (EQUALIZER MODE) button is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER (EQUALIZER MODE) button repeat- edly until the desired sound mode appears.

 

 

FLAT

No equalisation.

 

 

 

 

ROCK

For rock music.

 

 

CLASSIC

For classical music.

 

 

POPS

For pop music.

 

 

VOCAL

Vocals are enhanced.

 

 

JAZZ

For jazz.

 

 

Page 12
Image 12
Sharp XL-MP130 operation manual General control