4Installation

CAUTION

Sharp Edges

•Wear protective gloves and safety glasses during installation.

A. As a Fireplace

Select a suitable location that is not susceptible to moisture and is away from drapes, furniture and high traffic areas.

Note: Follow all national and local electrical codes.

WARNING

Shock Risk

Improperly grounded outlets could cause electrical shock.

•Always use properly grounded, fused and polarized outlets.

•Always use ground fault protection where required by electrical code.

WARNING

Shock Risk

Fire Risk

Improperly protected power cords could cause electrical shock or fire.

•Do not pinch the cord or lay against a sharp object.

•Do not cover the cord with carpeting, throw rugs or runners.

•Secure and arrange cord to avoid a tripping hazard.

Wall Cabinet Kit, Corner Cabinet Kit or Custom Cabinet Installation

The Cabinet must provide access to the wall outlet.

•For ease of electrical hookup, you may wish to install the heater near an existing outlet. A 15 amp, 120 volt circuit is required. A dedicated circuit is preferred but not essential in all cases. A dedicated circuit will be required if, after installation, the circuit trips or fuse blows on a regular basis while the heater is operating. Additional heaters on the same circuit may exceed the current rating of the circuit breaker.

•If using a wall cabinet or corner cabinet, refer to the installation instructions supplied with the kit. For custom cabinets, frame and construct with the opening and depth dimensions listed in Figures 3.1 and 3.2.

•Before plugging the heater into the wall outlet, make sure all control switches are in the “OFF” position.

•Before finishing the cabinet, the heater must be set into the cabinet and the power cord routed to the electrical outlet. If the power cord does not reach the outlet, a No. 16-AWG minimum wire size extension cord rated for a minimum of 1875 watts may be used.

•To complete the heater installation, refer to Section 5.

Non-Cabinet or Chase Installation

•Follow recommended framing dimensions in Figures 3.1 and 3.2.

•Set the heater into the framed opening. Secure the heater in place using the nailing flanges on both sides of the heater and nail to the framing.

•To finish out the heater, follow the instructions found in Section 6.

•To complete heater installation, see Section 5.

Quadra-Fire • QV26E • 4038-827 Rev E • 02/05

9

Page 8 Page 10
Page 9
Image 9
Hearth and Home Technologies QV26E owner manual Installation, As a Fireplace, Shock Risk Fire Risk
Page 8 Page 10

QV26E specifications

Hearth and Home Technologies has long been a leader in the fireplace and heating industry, and their QV26E model stands as a testament to their commitment to innovation and quality. The QV26E is a versatile, zero-clearance gas fireplace that seamlessly blends aesthetics with functionality, catering to both contemporary and traditional home designs.

One of the primary features of the QV26E is its large viewing area. The fireplace boasts a beautifully designed front that allows for an unobstructed view of the flames, creating a warm and inviting ambiance in any room. The large glass door not only enhances the visual appeal but also ensures maximum efficiency by providing better heat retention.

The QV26E is equipped with advanced technology that promotes efficiency and ease of use. Its electronic ignition system allows for reliable startups with the push of a button, eliminating the hassle of traditional match lighting. The model features adjustable flame height, enabling users to customize the intensity of the fire according to their preferences. This adaptability is complemented by a fan-forced heater, which circulates warm air throughout the space, enhancing heat distribution.

Energy efficiency is a hallmark of the QV26E. With an impressive annual fuel utilization efficiency (AFUE) rating, this gas fireplace conserves energy while delivering powerful heating performance. It can be configured for either natural gas or propane, providing flexibility based on the homeowner's needs.

The QV26E also includes easy-to-adjust controls, allowing users to manage the heat output and ambiance without any fuss. Additionally, it comes with a remote control option, enabling homeowners to ignite or extinguish the fire from the comfort of their seats.

Aesthetically, the QV26E offers a variety of styling options. Users can select from different media and log sets to create a personalized look that complements their interior decor. The fireplace is available in multiple finishes, ensuring that it fits harmoniously into any space.

Overall, Hearth and Home Technologies' QV26E model combines safety, efficiency, and beauty, making it a prime choice for those looking to enhance their living environment with a cozy and stylish heating solution. Whether you're looking to create a focal point in your home or simply seeking effective heating, the QV26E delivers in every aspect.
Top Page Image Contents