INSTALLATION INSTRUCTIONS (optional)
Foam seal A (adhesive type)
Fig.14
Installation in a sliding sash window
1.Cut the foam seal (adhesive type) to the proper length and attach it to the window frame,Fig.14.
Window panel
or
Window panel
22.1 ~ 38.6
22.1 ~ 38.6
Fig.15
2.Attach the window slider kit to the window stool. Adjust the length of the window slider kit according
to the width of window; shorten the adjustable window kit if the width of window is less than 22.1 inches. Open the window sash and place the window slider kit on the window stool. See Fig.15.
3.Cut the foam seal (adhesive type) to the proper length and attach it on the top of the window.
Shown as in Fig.16.
4.Close the sliding sash securely against the window.
5.Cut the foam seal to an appropriate length and seal the open gap between the top window sash and outer window sash. Shown as in Fig.17.
or
Fig.16
Foam seal
Fig.17
11
