NewAir AC-12100E owner manual Air Conditioner Features, Operation Panel Of The Air Conditioner

AIR CONDITIONER FEATURES

ELECTRONIC CONTROL OPERATING INSTRUCTIONS

Before you begin, thoroughly familiarize yourself with the control panel and remote controller and all its functions, then follow the symbol for the functions you desire.

The unit can be controlled by the unit control panel alone or with the remote controller .

NOTE: This manual does not include remote control operation instructions.Please see the Remote Control Operation Instructions packed with the unit for details.

OPERATION PANEL OF THE AIR CONDITIONER					Remote Signal Receptor
	(Available only on
					(Some models have the
	models with auto
		6			signal receptor on the
	swing feature.)		7	6
					front panel , Fig.2)
	8
	SWING
AUTO	COOL						HI
		F	C
							MED
HEAT	DRY	TIMER ON
	MODE	TIMER OFF			SLEEP	FAN	LOW
	FAN
	1	2		3	4	5
	Fig. 4

1MODE select button

Selects the appropriate operating mode. Each time you press the button, a mode is selected in a sequence that goes from AUTO, COOL, DRY, FAN and HEAT(except cooling only models). The mode indicator light illuminates under the different mode settings

2TIMER button

Used to initiate the AUTO ON start time and AUTO OFF stop time program, in conjunction with the & buttons.

3POWER button

Power on/off.

4SLEEP button

Used to initiate the SLEEP function.

5FAN button

Control the fan speed. Press to select the fan speed in four steps-LOW, MED, HI and AUTO. The fan speed indicator light illuminates under different fan settings except AUTO speed. When the auto fan speed is selected, all the fan indicator lightsturn dark.

6UP( ) and DOWN() buttons

Used to adjust (increasing/decreasing) temperature settings(2°F/ 1°C increments) in a range of 62°F (17°C) to 88°F (30°C)

orthe TIMER setting in a range of 0~24hrs..

NOTE: The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius. To convert from one to the other, press and hold the Up and Down buttons at the same time, for 3 seconds.

7LED Display

Shows the set temperature in°F and°C and the auto-timer settings.

While on DRY and FAN modes, it shows the room temperature.

Error codes:

E1- Room temperature sensor error- Unplug the unit and plug it back in. If error repeats, call for service.

E2- Evaporator temperature sensor error- Unplug the unit and plug it back in.

If error repeats, call for service.

E4- Display panel communication error- Unplug the unit and plug it back in. If error repeats, call for service.

P1- Bottom tray is full - Connect the drain hose and drain the collected water away. If error repeats, call for service.

6