Display Screen
FIREPLACE STATUS | THERMOSTAT DESIRED |
TEMP SETTING |
Idle When Remote is in ON Mode
The remote control will go into an idle mode if no but- tons are pressed within 5 seconds. Press any button to resume full functionality. In idle mode only active func- tions will show on the screen.
THERMOSTAT 
FLAME HEIGHT 
FAN SPEED 
ADJUSTABLE 
AUXILIARY
ADJUSTABLE 
OUTPUT (ON/OFF)
CONSTANT PILOT 
CHILD LOCK
INDICATOR
TRANSMISSION
INDICATOR
LOW BATTERY
INDICATOR
FUNCTION LEVEL INDICATOR
ROOM TEMP
DISPLAY
TIMER DISPLAY/FUNCTION
Figure 9. RC300 Display Screen
Function Buttons
Use POWER button to turn the unit on and off.
Menu | Use MENU button to display the menu functions. | |
Only functions that can be activated will be | ||
| ||
| displayed. For example: Flame Height will not | |
| be displayed when the remote status is OFF. | |
Select | Use the SELECT button to select the current | |
| feature. | |
V | Use the UP and DOWN arrows to toggle through | |
the menu functions and value selections in the | ||
V | ||
submenus. |
Standby mode
The remote control will go into a standby mode if no but- tons are pressed within 5 minutes. Press the POWER button to reactivate the remote control to ON mode. Ac- tive functions will be displayed
Hearth & Home Technologies • RC300 Multifunction Remote Control • | 5 |
