Changing Temperature Scale
To change the temperature display between Celsius and Fahrenheit, remove the battery cover from the back of the remote control and slide the switch to your desired tem- perature scale (see Figure 1). The screen will automati- cally change the indicators on the room temperature and set temperature portion.
4. Place remote control inside housing. See Figure 3.
Figure 1. Temperature scale
Installation of Remote Control Housing
CAUTION! Risk of Fire! DO NOT install damaged or modified components. Warranty will be voided if damaged or modified components are installed.
Kit components: One remote control, two #6 screws, two wall anchors, 3 AAA batteries and one AUX300 module. If batteries are properly installed the remote will turn on
1.Remove remote control components from packaging.
2.Remove battery cover from the back of the remote by sliding it down and install 3 AAA batteries.
To prevent unintended operation when not using your fire- place for an extended period of time (summer months, vacation, trips, etc):
•Remove batteries from remote control.
•Unplug switching adapter and remove
3.Secure the remote control housing on a flat wall sur- face using the two screws and wall anchors provided. See Figure 2.
Figure 2. Mounting Remote Control Housing
Figure 3. Remote in Housing
5. Close the housing door. See Figure 4.
Figure 4. Mounting Remote Control Housing
AUX300 Module Installation
•Insert the 4 hole harness from the AUX300 module into the 4 pin plug on the control module. See Figure 5.
CONTROL MODULE
AUX 300 CABLE
Figure 5. AUX 300 module installation
2 | Hearth & Home Technologies • RC300 Multifunction Remote Control • |
