Install Left Rear Mount
1.Using a lifting device, place left mount (2) between cab support bracket and the tractor housing. Align holes and install tractor hardware previously removed.
NOTE: Make sure fuel tank is moved out of the way to allow access to the cab support.
2.Secure left mount to tractor frame using two cap screws (5) and hardened flat washers (6).
3.Secure mount to bottom of transmission housing using one cap screw (4) and hardened flat washer (6).
4.Attach crossmember (3) to the left mount using two cap screws 8), four hardened flat washers (9), and hex nuts (7).
Figure 7. Left Rear Mount Installed
1. | 1016200 | Right mount |
|
2. | 1015401 | Left mount | 2 |
3. | 1016216 | Crossmember |
4.307550 M20 x 2.0P x 60 mm Cap screw
5.307553 M20 x 2.5P x 50 mm Cap screw
6. | 57798 | 3/4 Hardened flat washer | Tractor |
7. | 307863 | M16 x 2.0P Hex nut | Hardware |
8.37863 M16 x 2.0P x 50 mm Cap screw
9.57817 5/8 Hardened flat washer
5
1 | 6 |
6
4
6 | 6 |
| 7 | |
| 5 | 3 | ||
4 | 9 | |||
|
| |||
9 |
|
| ||
|
|
| ||
| 8 |
|
|
Figure 8. Rear Mount Installation
6 Mount Installation | MAN0469 (9/9/2005) |
|
|