Install Oscillation Stops
1.Locate the oscillation stops on left and right sides of the front axle.
2.Remove oscillation stop, place two washers (6) between stop and mounting pad, and replace oscillation stop.
3.Secure using tractor hardware.
4.Repeat for opposite side of tractor.
6.57798 3/4 Hardened flat washer
6
DP8
Figure 11. Oscillation Stop Installed - Left Side
As a valued customer, Woods appreciates your comments. Once loader mount and hydraulic hoses have been installed, please take a few minutes to complete the Loader Mount Evaluation sheet that was supplied with your loader mount. Your comments will help us continue to bring you quality products.
8 Mount Installation | MAN0469 (9/9/2005) |
|
|
