HearthStone Quality Home Heating Products Inc

Tucson Model #8700

VENTING COMPONENTS &

CONFIGURATION

The Tucson cannot be vented jointly with any other solid fuel or gas appliance. It must be vented directly to the outside of the building using a proper termination as listed in the manual. The only type of venting pipe approved for use with your Tucson Direct- Vent stove is Simpson Dura-Vent’s GS, AmeriVent Direct and Secure Vent Direct- Vent Pipe. The venting configurations are shown in Figures 12 - 18. After determining the venting configuration for your stove, select the vent system that will accommodate your installation.

Caution: Make sure all stove and termination cap clearances have been observed per the Owner’s Manual.

Caution: Be sure there is no wiring or plumbing in the chosen location.

Caution: Venting terminals shall not be recessed into a wall or siding.

Note: If further direction is needed for installation, please refer to the venting instructions, which are provided with the venting components.

ACCEPTABLE DIRECT-VENT

TERMINATION CAP LOCATIONS

The vent/air intake termination clearances above the high side of an angled roof are as follows:

Roof Pitch

Feet

Meters

Flat to 6/12

1

0.3

7/12 to 9/12

2

0.6

10/12 to 12/12

4

1.2

13/12 to 16/12

6

1.8

17/12 to 21/12

8

2.4

Listed below are Simpson Dura-Vent,

AmeriVent Direct, and Secure Vent components acceptable for installation, along with the minimum venting kit available. The venting system must be comprised of the appropriate venting components as specified.

APPROVED VENTING SYSTEM COMPONENTS

*Component Description

90 0 Elbow

45 0 Elbow

6" Straight

9" Straight (Simpson only) 12" Straight

24" Straight

36" Straight

48" Straight

11"-14 5/8" Adjustable Pipe Length Horizontal Vent Cap

Vertical Vent Cap Snorkel 14

Vinyl Siding Standoff 4 x 6 5/8" Round Ceiling Support Wall Thimble Covers

Wall thimble

CHIMNEY LINER SYSTEM

1.Direct-Vent Chimney Liner Termination Kit

2.Chimney Liner Flex

3.Co-Linear Flex Connector

4.Co-Axial to Co-Linear Appliance Connect

*MINIMUM VENT KIT

*HearthStone Stove Starter Collar

45º Elbow

90º Elbow

(2) 9” Straight

Round Ceiling Support

Wall Thimble Cover

Wall Thimble

Horizontal Vent Cap

*Supplied by HearthStone

20

Page 20
Image 20
Hearth and Home Technologies Tucson (8700) Venting Components Configuration, Approved Venting System Components

Tucson (8700) specifications

Hearth and Home Technologies Tucson (8700) represents a significant advancement in the realm of home heating solutions. This gas fireplace model combines elegant design with cutting-edge technology, providing both aesthetic appeal and functional efficiency. The Tucson is designed to serve as a focal point in any living space while delivering warmth and comfort.

One of the main features of the Tucson (8700) is its sleek, modern design. Available in a variety of finishes, the fireplace fits seamlessly into a range of decor styles, from contemporary to traditional. Its large viewing area provides an unobstructed view of the flames, creating an inviting ambiance. The glass front is both stylish and functional, enhancing the overall appeal while maximizing heat output without compromising safety.

The Tucson is engineered with advanced technology that prioritizes efficiency and convenience. It utilizes a direct vent system, ensuring that the fireplace draws air from the outside and expels exhaust gases efficiently, improving indoor air quality. This feature allows for installations in a variety of locations within the home without the need for traditional chimney systems.

Another notable characteristic is its adjustable flame height and heat output. Homeowners can easily customize the warmth and ambiance to suit their preferences, providing versatile heating options for various occasions. The Tucson includes a remote control feature, allowing users to operate the fireplace without having to leave their comfortable seating area.

Safety is a key consideration in the design of the Tucson (8700). Equipped with an automatic shutoff feature, the fireplace will turn off if it detects any irregularities, ensuring peace of mind for users. The glass front remains cool to the touch, minimizing the risk of burns.

Additionally, the Tucson can be complemented with a variety of decorative options, including log sets and decorative media, allowing homeowners to create a personalized look that matches their style. This flexibility, along with its efficiency and stunning design, makes the Hearth and Home Technologies Tucson (8700) a standout choice for modern homes seeking both beauty and warmth.