Heat & Glo LifeStyle PIER-40 owner manual 7 Installing a TCT1175 Terra Cotta Cap

•TCT1175 Terra Cotta Cap

	Place waterproof sealer
Remove 2 screws	under each flange of the
	termination cap and on
from front & back
	top of each screw to
to lift the top off
	help prevent leaks.
Termination Cap	The last section of pipe
	must stop between 2 in.
	(51 mm) above top of
Collar	chase and 7 in. (178 mm)
	below top of chase
2 in. (51 mm)
Minimum Height
Chase Top	2 in. (51 mm)
	7 in. (178 mm)

Chase

Chimney

Pipe

Termination cap pipe and chimney section must overlap

1-1/2 in. (38 mm)

Figure 9.7 Installing a TCT1175 Terra Cotta Cap

Heat & Glo • BAY-40, PIER-40 • 34977 • Rev AB 7/12 35