SL-550, SL-750 and SL-950 Series
OPTIONAL DOOR INSTALLATION INSTRUCTIONS
KITS: DF-550M, DF-750M and DF-950M
Leave this manual with party responsible for use and operation.
CAUTION! Risk of Cuts or Abrasions. Wear protective
gloves and safety glasses during installation.
Installing the optional door on the Fireplaces
Step 1.
Note: Install shoulder screws to the side of the unit (see Figure 1).
Step 2.
Step 3. Cut the top 2 ½” louver off of the lower louver assembly as shown in Figure 2. Note: Assure all the sharp burrs are removed after cutting.
Step 4. Reinstall the lower louver assembly. Step 5. Install the door option.
Step 6. Install the top louver assembly which came with the optional door.
Cleaning Instructions for Doors
Use a microfiber cloth and Windex® Original Glass Cleaner or 03M003 Stove Bright® Glass Cleaner to clean the door immediately after installation to remove acids deposited by the installer or technician. Spray the cleaner onto the microfiber cloth and carefully wipe the entire surface. The door should be cleaned in this manner annually by the homeowner to remove fingerprints or other contaminants. Once oxidation of the paint pigment has occurred, cleaning will not restore the original color.
INSTALL
SHOULDER
SCREWS
Figure 1
CUT
HERE
Figure 2
Please contact your Heat & Glo dealer with any questions
or concerns.
For the location of your nearest Heat & Glo dealer,
please visit www.heatnglo.com.
Heat & Glo, a brand of Hearth & Home Technologies Inc.
7571 215th Street West, Lakeville, MN 55044
www.heatnglo.com
Heat & Glo •
