Installation
Connection schematic
GB | Antenna | Bluetooth antenna |
|
ISO B
ISO A
External amplifier
Microphone unit
Installation
The device can be installed into any standard ISO mounting duct. In the event that your vehicle does not have an ISO mounting duct contact your local specialist establishment, local dealer or the technical department of the store.
NOTICE
►Before installation remove, without fail, the two transport securing screws on the top of the housing (marked with a red sticker)!
►Connect the cable before finally installing the device. Make sure that it is plugged in properly and that the system functions correctly.
Installation instructions
■Install the device in the duct provided for it or select the installation location so that all buttons can be comfortably reached and the driver is not impeded.
■Only connect the device to a properly installed 12 V automotive battery.
■Only connect the device in the vehicle via an ISO plug.
■Install the device in such a way as to avoid the development of heat accumu- lation and so that the device is sufficiently ventilated.
16 | Bluetooth Car Radio KH 2376 |
