Silvercrest KH 2376 Switching On and Off, Settings, Volume, Bass/Treble/Balance/Fader

Handling and operation

Switching On and Off

‹	Press briefly the POWER/DIM button to switch the device on. In the display	GB
	the notice WELCOME appears.

‹Briefly touch the POWER/DIM button to dim the display illumination.

‹To switch off hold down the POWER/DIM button longer.

Settings

WARNING

Hearing damage as a result of too high a volume!

If the volume is set too high it can lead to permanent hearing damage.

►Set the volume to moderate levels only.

Volume

‹Turn the multi controller to set the volume.

Bass/Treble/Balance/Fader

‹Press the SEL button. The current volume level is shown. Each further press of the SEL button accesses the next setting point.

The following settings are possible:

VOL - Volume (from 0 to 45),

BAS - Bass (from -7 to +7),

TRE - Treble (from -7 to +7)

BAL - Balance (sound distribution between the right and left speakers) (from 8L to 8R)

FAD - Fader (sound distribution between the rear and front speakers) (from 8R to 8F)

‹Turn the multi controller to change the settings of the displayed menu items.

further settings with the SEL button

‹Hold down the SEL button for approx. 2 seconds and then press the SEL button repeatedly until the desired function is shown in the display.

INVOL - switch on volume

‹Turn the multi controller to set the volume level, with which the device is to be set when turned on.

Bluetooth Car Radio KH 2376 21