Heatcraft Refrigeration Products CC-CUBZTB manual Electrical Data, Number, Evap, Mop††, Volts

Electrical Data

Medium & Low Temperature – R-404A/R-507

		Compressor		Condenser Fan			Beacon II™ or			Remote Loads ‡
				Motors			Air Defrost
Unit Model	Compressor									Electric Defrost
Number	Model	RLA	LRA	Qty.		FLA	MCA†	MOP††	Evap.	Defrost	System	System
									Fan	Heaters	MCA†	MOP††
									Amps	Amps
					208-230 Volts
CDV*150BM6	4C2067PH	48.7	294	2		9.6	70.5	110
CDV*200BM6	4C2397PH	57.7	352	2		14.0	86.1	125
CDV*220BM6	4B2707PH	61.5	352	2		14.0	90.9	150
CDV*250BM6	4B3139PH	75.6	436	2		14.0	108.5	175
CDV*300BM6	4B3604PH	89.7	490	3		21.0	133.1	200
CDV*330BM6	6B4060PH	100.0	550	3		21.0	146.0	225
CDV*350BM6	6B4709PH	105.1	550	3		21.0	152.4	250	CONTACT FACTORY FOR SYSTEM
CDV*400BM6	6B5406PH	141.0	700	4		28.0	204.3	325
CDV*500BM6	6B6462PH	143.6	950	4		28.0	207.5	350		ELECTRICAL RATINGS
CDV*130BL6	4B2707PL	43.6	294	2		9.6	64.1	100
CDV*150BL6	4B3139PL	46.2	294	2		9.6	67.4	110
CDV*200BL6	4B3604PL	57.7	352	2		9.6	81.7	125
CDV*220BL6	6B4060PL	65.4	436	2		14.0	95.8	150
CDV*250BL6	6B4709PL	69.2	436	2		14.0	100.5	150
CDV*300BL6	6B5406PL	84.6	490	2		14.0	119.8	200
CDV*400BL6	6B6462PL	97.4	700	3		21.0	142.8	225
					460 Volts
CDV*150BM6	4C2067PH	24.4	147	2		4.8	35.3	60
CDV*200BM6	4C2397PH	28.8	176	2		7.0	43.0	70
CDV*220BM6	4B2707PH	30.8	176	2		7.0	45.5	70
CDV*250BM6	4B3139PH	37.8	218	2		7.0	54.3	90
CDV*300BM6	4B3604PH	44.9	245	3		10.5	66.6	110
CDV*330BM6	6B4060PH	50.0	275	3		10.5	73.0	110
CDV*350BM6	6B4709PH	52.6	275	3		10.5	76.3	125	CONTACT FACTORY FOR SYSTEM
CDV*400BM6	6B5406PH	70.5	350	4		14.0	102.1	150
CDV*500BM6	6B6462PH	71.8	425	4		14.0	103.8	175		ELECTRICAL RATINGS
CDV*130BL6	4B2707PL	21.8	147	2		4.8	32.1	50
CDV*150BL6	4B3139PL	23.1	147	2		4.8	33.7	50
CDV*200BL6	4B3604PL	28.8	176	2		4.8	40.8	70
CDV*220BL6	6B4060PL	32.7	218	2		7.0	47.9	80
CDV*250BL6	6B4709PL	34.6	218	2		7.0	50.3	80
CDV*300BL6	6B5406PL	42.3	245	2		7.0	59.9	100
CDV*400BL6	6B6462PL	48.7	350	3		10.5	71.4	110
					575 Volts
CDV*150BM6	4C2067PH	19.6	117	2		4.6	29.1	40
CDV*200BM6	4C2397PH	23.6	140	2		5.6	35.1	50
CDV*220BM6	4B2707PH	24.4	140	2		5.6	36.1	60
CDV*250BM6	4B3139PH	30.1	165	2		5.6	43.2	70
CDV*300BM6	4B3604PH	35.9	196	3		8.4	53.3	80
CDV*330BM6	6B4060PH	39.7	220	3		8.4	58.0	90
CDV*350BM6	6B4709PH	41.7	220	3		8.4	60.5	100	CONTACT FACTORY FOR SYSTEM
CDV*400BM6	6B5406PH	56.4	280	4		11.2	81.7	125
CDV*500BM6	6B6462PH	57.1	340	4		11.2	82.6	125		ELECTRICAL RATINGS
CDV*130BL6	4B2707PL	17.3	117	2		4.6	26.2	40
CDV*150BL6	4B3139PL	18.6	117	2		4.6	27.9	45
CDV*200BL6	4B3604PL	23.1	140	2		4.6	33.5	50
CDV*220BL6	6B4060PL	26.9	174	2		5.6	38.5	60
CDV*250BL6	6B4709PL	27.6	174	2		5.6	40.1	60
CDV*300BL6	6B5406PL	33.3	196	2		5.6	47.2	80
CDV*400BL6	6B6462PL	39.1	280	3		8.4	57.3	90

CDV* = CDVS is Beacon II™

†MCA = Minimum Circuit Ampacity

†† MOP = Maximum Overcurrent Protection

‡ Condensing unit data plate ratings will be based on actual system match.

Beacon II™ and Air Defrost Units do not carry any of the evaporator fan or heater loads. Power is brought directly to the evaporators and does not go through the condensing unit.

An evaporator heater hold out relay (option) is recommended when two or more evaporators are connected to a single (CDV) condensing unit to allow termination on coils that have already defrosted to prevent unnecessary steaming. This option is not needed on Beacon II™ (CDVS) systems wired for a Master / Slave operation. Power is brought to each Beacon evaporator. Each coil terminates its own defrost. Refrigeration will not start until all coils have terminated defrost.

Single Vertical Air Discharge Condensing Unit

15