Code Settings
Note: Most single system installations will not require any change to the code setting. Transmitter(s) and receiver(s) must have the same code and group setting to work together. Switches 1 through 3 set the code. Switch 4 sets the Group (A or B). See page 2 for switch locations.
( 
– Indicates Position of Switch)
Example 1 - Code Settings, System 1
(Factory Setting)
Transmitter(s)/ | Transmitter(s)/ |
Receiver(s) Code | Receiver(s) Code |
Group “A” | Group “B” |
Example 2 - Code Settings, System 2
Note: When operating more than one system independently of each other, set each system to a different code. There are 8 codes avail- able by changing the settings of switches 1 through 3.
Transmitter(s)/
Receiver(s) Code
Group “A” 
Code Switch Locations
Code |
|
|
Switches | DAY | NIGHT |
| NIGHT | ONLY |
1 2 3 4 | DETECT | |
CODES |
|
|
180° Motion Sensor
| RAINTIGHT | ã THIS END UP |
Code |
| OUTDOOR USE ONLY. |
FOR WALL AND CEILING MOUNT ONLY | ||
Switches | SUITABLE FOR WET LOCATION |
MADE IN CHINA |
LAMP MODE
switches 
Halogen Security Light and Floodlight
Note: The “X” has been | ON |
| |
placed on the switches to |
|
help clarify the code settings |
|
on the previous page. |
|
1 | 2 | 3 |
|
| 4 | ||
|
| ||
|
|
|
