Heath Zenith 2LBL9, 2LBN1 Troubleshooting Guide, Regulatory Information, Symptom, Possible Cause

Models: 2LBN1 2LBL9

1 24
Download 24 pages 57.81 Kb
Page 8
Image 8
Troubleshooting Guide

Troubleshooting Guide

SYMPTOM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

 

Device does not come on.

1.

Circuit breaker or fuse is turned off.

1.

Verify circuit breaker or fuse is turned

 

 

 

 

on.

 

2.

Switch on device is turned off.

2.

Verify switched device is turned on.

 

3.

Interrupted by another device.

3.

Change codes on transmitter and

 

 

 

 

receiver units.

 

4.

Does not respond immediately after

4.

Wait for 90 second initialization period

 

 

installation.

 

(remote motion sensor).

 

5.

Signals from transmitter are being

5.

Check for metal objects that could

 

 

blocked, or transmitter is out of range.

 

block the signal, or reposition the

 

 

 

 

transmitter.

 

6.

Weak battery in the transmitter.

6.

Check battery charge and replace if

 

 

 

 

necessary.

 

7.

Dip switches on transmitter and receiver

7.

Verify code settings on transmitter and

 

 

units do not match.

 

receiver units are set the same.

 

8.

Device is defective.

8.

Test using different device.

 

 

 

 

 

Device does not turn off.

1.

Same as 5, 6, and 7 above.

1.

Same as 5, 6, and 7 above.

 

 

 

 

 

Device comes on randomly.

1.

Short term power line failure.

1.

Next transmission from transmitter

 

 

 

 

will reset receiver to correct state.

 

2.

Another transmitter on the same

2.

Change codes on transmitter and

 

 

frequency.

 

receiver units.

 

 

 

 

 

Regulatory Information

This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.

The user is cautioned that changes or modifications not expressly approved by the party responsible for regulatory compliance could void the user’s authority to operate the equipment.

1 Year limited warranty:

Should this product fail to perform satisfactorily due to a defect or poor workmanship within one year of date of purchase, return it to the place of purchase and it will be replaced, free of charge. Incidental or consequential damages are excluded from this war- ranty. Light bulbs are not covered.

Manufactured for Grainger International, Inc.

Lake Forest, IL 60045

598-1326-01

Page 8
Image 8
Heath Zenith 2LBL9 Troubleshooting Guide, Regulatory Information, Symptom, Possible Cause, Solution, Year limited warranty