Heath Zenith manual Operation, Operating Instructions & Parts Manual 2LBN3, 2LBN4, Features

Operating Instructions & Parts Manual 2LBN3, 2LBN4

Please read and save these instructions. Read carefully before attempting to assemble, install, operate or main- tain the product described. Protect yourself and others by observing all safety information. Failure to comply could result in personal injury and/or property damage! Save these instructions for future reference.

®

DualBrite® Replacement Sensor Head

TEST

Put ON-TIME switch ON-TIME		DualBrite®
on the sensor bottom
to TEST and the Dual-
	TEST 1 5 20	Off 3 6 Dusk to
Brite® switch OFF.				Dawn
AUTO
Put the ON-TIME switch in the 1, 5,			ON-TIME
or 20 minute position.
			TEST 1 5 20
MANUAL MODE

Features

• DualZone™ Technology.
•	Turns on lighting when motion is detected.
•	Automatically turns lighting off.

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 20 position.

1 Second OFF

then...

• Patented DualBrite® Timer.

• Photocell keeps the lighting off during daylight hours.

• LED indicates motion was sensed (day or night).

... back on.

Mode Switching Summary

Requirements

•Not for use with fluorescent lights.

•The light control requires 120-volts AC.

•If you want to use Manual Mode, the control must be wired through a switch.

•Install sensor in accordance with local codes.

OPERATION

Mode:	On-Time	Works: Day	Night
Test	5 Seconds	x	x
Auto	1, 5, or 20 Min		x
Manual	To Dawn*		x
Accent	3, 6 Hr, to Dawn		x

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

	TEST	Move ON-TIME Switch to
			1, 5, or 20 minutes
	AUTO		Flip light switch off
			for one second then
			back on*
MANUAL MODE

*If you get confused while switching modes, turn the power off for one minute, then back on. After the cali- bration time the control will be in the AUTO mode.

DualBrite® TIMER

Light comes on half bright for selected time after dusk (Off, 3 hr., 6 hr., until dawn). Selecting OFF disables this feature. The motion sensing features will continue to work as described in this manual. If motion is sensed, the light turns on full bright for the ON-TIME (1, 5, or 20 minutes) then returns to dim mode.

HEA 011	598-1115-04
Printed in China	LPG-5316
09/07