Features
•Automatically comes on when motion is detected.
•Automatically turns light off.
•Photocell keeps the light off during daylight hours.
Motion Sensing Diecast Metal Lantern
Lantern Assembly
1.Place glass fixture onto base assembly.
2.Line up the arrow on the bottom of glass fixture with the arrow on the fixture base (see illustration below).
Requirements
•The Light Control requires 120 volts AC.
•If you want to use Manual Mode, the control must be wired through a switch.
•Some electrical codes require installation by a qualified electrician.
Unpacking
Be sure to remove all contents from packaging and verify all items are present before assembling this light fixture. This package includes the following items:
•Lantern (Includes:Top Cover, Glass Fixture, Fixture Base)
•Universal mounting bracket
•Mounting hardware
•Wire nuts
•Owner’s Manual
Glass Fixture 
Arrows
Fixture
Base
3.Gently push the two pieces together and rotate the glass fixture 90° as shown below.
Glass Fixture
Fixture Base
Before installation, record the model number listed inside the fixture. Attach receipt in case of possible warranty issues.
Model Number:
© 2007 DESA Specialty Products™ |
