Heath Zenith 5598 Least Sensitive, Most Sensitive, Operation, Manual Mode, Mode Switching Summary

The sensor is less sensitive to motion directly towards it and more sensitive to motion across coverage area.

MotionMotion

	Sensor
Least Sensitive		Most Sensitive
	OPERATION
Mode:	On-Time	Works: Day	Night
Test	5 Seconds	x	x
Auto	1, 5, or 10		x
	Minutes
Manual	To Dawn*		x

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

MANUAL MODE

Mode Switching Summary

	TEST	ON-TIME Switch at 1, 5, or
		10 minutes
	AUTO		Flip light switch off
			for one second then
MANUAL MODE			back on*

*If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode.

Adjustment of Coverage Area

The sensor on this light fixture detects “motion”by the movement of heat across the coverage area.However, following are examples of objects that also produce heat and can cause the sensor to trigger:

• Pools of Water	• Air Conditioners
• Dryer Vents	• Animals
• Heating Vents	• Automobile Traffic

If you suspect that a heat source of this type is trig- gering the sensor, reduce the sensitivity.

SPECIFICATIONS

Range	Up to 30 ft. (9.1 m) [varies
	with surrounding tempera-
	ture].

Manual mode only works at night because daylight returns the sen- sor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position.

1 Second OFF

then...

Sensing Angle	180°
Electrical Load	Up to 100 Watt Maximum
	Incandescent
Bulb Type	Medium Base, Type “A”,
	100 Watt Maximum
Sensor Capacity	360 Watt (3.0 A) Maximum
Power Requirements	120 VAC, 60 Hz
Operating Modes	TEST, AUTO, and
	MANUAL MODE
ON-Timer	1, 5, 10 minutes
Test Timer	5 Seconds

... back on.

598-1314-00

Manual Mode Timer...... Dusk-to-Dawn