Heath Zenith 598-1112-05 manual Install Chime Cover, Pin for Hanging Cover

Install Chime Cover

Place chime cover securely over base.

•For hang pin and hole covers: Attach hang pin to base prior to mounting base on wall. Line up hole in cover with pin and hang (see Figure 3).

•For snap-on covers: Apply pressure to the cover until it snaps into place (see Figure 4). Firmly grasp cover and pull to remove from base.

•For hang bracket covers: Determine if the cover will hang vertically or horizontally on the base. Place bracket into the cor- rect slot inside chime cover.

- - 598-1112-05

Hang Pin, Slide-On Type

Hang Pin,

Snap-On Type

Figure 3 - Pin for Hanging Cover

Adjust bracket (if necessary) so that bracket is flush with back surface of cover. Slide bracket into slot on base to hang cover (see Figure 5).

Note: Never use cleaners or polishes. Never use any fluids on the chime mechanism. Use dry cloth to clean chime cover and base.

Base Orientation

Marking

ONT
FR
ANS
TR
RE	AR

Illustrations may vary from actual chime unit.

Snap-On Cover

Figure 4 - Mounting Snap-On Cover