Heath Zenith 598-1113-05 manual Install Chime Cover, Turning Over Cover Pin for Hanging Type

- - 598-1113-05

Install Chime Cover

Place chime cover securely over base.

•For hanging type cover: Remove, turn over, and reinstall the cover pin (see Figure 3). Hang cover on cover pin.

•For snap-on type cover: Apply pressure to the cover until it snaps into place (see Figure 4). Firmly grasp cover and pull to remove from base.

Note: Never use cleaners or polishes. Never use any fluids on the electronic chime mechanism. Use dry cloth to clean chime cover and base.

Cover Pin

Figure 3 - Turning Over Cover Pin for Hanging Type

Cover

Base Orientation	Snap-On Cover
Marking

Illustrations may vary from actual chime unit.

Figure 4 - Mounting Snap-On Type Cover