SPECIFICATIONS
This product is to be installed indoors only.
Electrical Input | 120V, 60 Hz. |
Fluorescent* Load | (2) 30 Watt minimum, |
| Up to 400 Watts Maximum Rapid Start Ballast |
Motor Load | Up to 1/8 HP Maximum |
Incandescent | Up to 500 Watts at 120VAC |
Adjustable approximately 5 sec. to 20 min. | |
Photocell Sensor | From full daylight to less than 1 FC. |
Coverage | up to 15 ft. (4.6 m) at 150°, |
| up to 30 ft. (9.1 m) in front of the sensor |
Specification subject to change without notice.
*Designed for use with standard 3 ft./30 watt and 4 ft./40 watt
Minimum of two tubes required. Note: May not be used to operate electronic or magnetic ballasts.
HeathCo LLC reserves the right to discontinue products and to change specifications at any time without incurring any obligation to incorporate new features in previously sold products.
