Heath Zenith 6107 Special Installations, For single switch SINGLE SWITCH INSTALLATION, Brown

SPECIAL INSTALLATIONS

For single switch SINGLE SWITCH INSTALLATION

installations, con- nect the wall switch as shown here.

BLACK

BLACK

BROWN

FROM

POWER OFF AUTO ON

SOURCE

RED

BLACK

6107

WHITE WHITE

If you want to have mo- tion sensors at both 3-way switches, con- nect them as shown below. The minimum wattage may increase to 100 W for fluores- cent and 50 W for in- candescent lighting.

EXISTING LIGHT SWITCH CONFIGURATION

FROM	WHITE	WHITE	WHITE
POWER	BLACK	*COMMON	*COMMON
SOURCE
		RED
		(In Wall)
		BLACK	BLACK

			2 SWITCH INSTALLATION
FROM	WHITE			WHITE		WHITE
POWER
SOURCE
BROWN				BROWN
			BLACK			BLACK
RED				BLACK
	OFF	AUTO	ON	RED	OFF AUTO	ON
(From				(From 6107)		BLACK
6107)			6107			6107
			RED (In Wall)

*COMMON-Used for illustrative Purposes Only. Check Your Switch. The common may be in a different loca- tion, depending on the brand of your switch.

RED is used to represent the second wire between two standard three-way switches. This may not be the color used in all installation. If you are not sure about your wiring, call an electrician for installation help. There is also a RED wire on the 6107 switch. Check the instructions above closely and do not confuse the two.

- - 595-4514-16