Heath Zenith 6107 manual Test For Correct Common Wire Connection

INSTALLATION

Test For Correct Common Wire Connection:

Re-install the switch.

Turn the circuit breaker back on.

Leaving the jumpered switch in one position,

flip the other 3-way switch on and off.

	Lights		Yes		Jumper is
	turn on				correct. Go
	and off.			to next page.
	No
Move one end of the jumper				Flip the switch with the
wire to the previously					jumper wire to the
unconnected terminal.					other position.
				Flip the unjumpered switch
Remove the jumpered
						on and off.
switch from the
junction box.
Turn the power		No	Lights		Yes		Jumper is
off at the			turn on				correct. Go
circuit breaker.			and off.				to next page.

- - 595-4514-16