Installation
Caution: before starting the installation, turn the power off at the
circuit breaker.
If you want to use the Manual Override feature you will need to install the fixture on a circuit controlled by a switch.
Wall Mount | Eave Mount |
❒Loosen the thumbscrews holding the sensor head and lampheads.
❒Adjust the various parts so that the fixture looks similar to this illustration.
❒Finger tighten the thumbscrews at this time.
❒Loosen the thumbscrews holding the sensor head and lampheads.
❒Adjust the various parts so that the fixture looks similar to this illustration.
❒Finger tighten the thumbscrews at this time.
- - |
