SPECIFICATIONS
This product is to be installed indoors only.
Electrical Input | 120V, 60 Hz. |
Fluorescent* Load | (2) 30 Watt minimum, |
| Up to 400 Watts Maximum Rapid Start Ballast |
Motor Load | Up to 1/8 HP Maximum |
Incandescent | Up to 500 Watts at 120VAC |
Adjustable approximately 5 sec. to 20 min. | |
Photocell Sensor | From full daylight to less than 1 FC. |
Coverage | up to 15 ft. (4.6 m) at 150°, |
| up to 30 ft. (9.1 m) in front of the sensor |
Specification subject to change without notice.
*Designed for use with standard 3 ft./30 watt and 4 ft./40 watt
Minimum of two tubes required. Note: May not be used to operate electronic or magnetic ballasts.
DESA Specialty Products reserves the right to discontinue products and to change specifications at any time without incurring any obliga- tion to incorporate new features in previously sold products.
