Heath Zenith manual ONE SL-6107 Switch in Circuit

INSTALLATION

See pages 4 through 6 for detailed instructions for installing and wiring the SL-6107 Wall Switch.

ONE SL-6107 SWITCH IN CIRCUIT

WHITE WHITE WHITE

FROM

POWER BLACK *COMMON*COMMON

SOURCE

RED

(In Wall)

BLACK BLACK

SL-6107 SWITCH 1ST IN CIRCUIT

WHITE	WHITE	WHITE
FROM		ADD JUMPER WIRE
POWER
SOURCE		*COMMON
BLACK BLACK	BROWN	RED
		(In Wall)
OFF AUTO	ON		BLACK
	RED	BLACK
SL-6107	(From 6107)	EXISTING

3-WAY SWITCH

SL-6107 SWITCH 2ND IN CIRCUIT

WHITE

WHITE

WHITE

FROM	ADD JUMPER WIRE
POWER
SOURCE		*COMMON
BLACK		RED	BROWN		BLACK
		(In Wall)
			OFF AUTO	ON	BLACK
		BLACK	RED
		EXISTING	(From 6107)		SL-6107

3-WAY SWITCH

*COMMON-Used for illustrative Purposes Only. Check Your Switch. The common may be in a different loca- tion, depending on the brand of your switch.

RED is used to represent the second wire between two standard three-way switches. This may not be the color used in all installation. If you are not sure about your wiring, call an electrician for installation help. There is also a RED wire on the SL-6107 switch. Check the instructions above closely and do not confuse the two.

595-4514-14 - -