E. Junction Box Installation
If the box is being wired from the OUTSIDE of the appli- ance:
•Remove the cover plate located on the outer shell - right side (see Figure 12.2).
•Install the supplied Romex™ connector in the cover plate.
•Make all necessary wire connections and reattach the cover plate to the outer shell.
If the box is being wired from the INSIDE of the appli- ance:
•Remove the screw attaching the junction box/receptacle to the outer shell, rotate the junction box inward to disengage it from the outer shell.
•Pull the electrical wires from outside the appliance through this opening into the valve compartment.
•Make all necessary wire connections to the junction box/ receptacle and reassemble the junction box/receptacle to the outer shell.
F. Wall Switch Installation for Fan (Optional)
If the box is being wired to a wall mounted switch for use with a fan, see Figure 12.3:
•The power supply for the appliance must be brought into a switch box.
•The power can then be supplied from the switch box to the appliance using a minimum of
•At the switch box connect the black (hot) wire and red (switch leg) wire to the wall switch as shown.
•At the appliance connect the black (hot), white (neutral) and green (ground) wires to the junction box as shown.
•Add a 1/4 in. insulated female connector to the red (switch leg) wire, route it through the knockout in the face of the junction box, and connect to the top fan switch connector (1/4 in. male) as shown.
|
|
|
| Romex |
|
|
|
| Connector |
|
|
|
| 14/2WG |
|
|
|
| Cover Plate |
|
|
|
| outside firebox |
T |
|
|
| |
H |
|
|
|
|
W | L | K |
|
|
B |
|
| ||
|
|
| ||
|
|
|
| |
T |
| K |
|
|
H |
|
|
| |
W |
| L |
|
|
| B |
| Copper | |
|
|
| ||
|
|
|
| |
|
|
| GRN wire | ground attached |
|
|
| to GRN screw with | |
|
|
| inside box | |
|
|
| GRN wire | |
|
|
|
| |
|
|
| NOTICE: DO NOT wire | |
|
|
| 110 VAC to wall switch. | |
Figure 12.2 Junction Box Detail |
| |||
|
|
|
| Switch |
Minimum
|
|
|
|
|
| Red |
|
|
|
|
| Black |
| |||
|
|
|
|
|
| Black |
|
|
|
|
|
|
| |||
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
| White |
|
|
|
|
|
| White |
| ||
Junction Box |
|
|
|
| Green |
|
|
|
|
|
| Green |
| |||
|
| Red | Black | White | Green |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
Power
Switch Box Supply
Wires
Knockout
Red
Figure 12.3 Junction Box Wired to Wall Switch or BC10
Heatilator • Caliber BV Series • | 27 |
