H.Burn Rate Air Control

•The air supply enters at the upper front of the firebox, near the top of the glass door.

•This preheated air supplies the necessary fresh oxygen to mix with the unburned gases, helping to create sec- ond, third and fourth combustions

•This air is regulated by the Burn Rate Air Control.

•There are four settings High, Medium-High, Medium-Low and Low.

•When the control is raised all the way up it is on the High setting and when pushed all the down it is on the Low setting. Figure 10.1.

-HIGH

-MEDIUM HIGH -MEDIUM -LOW

I. Burn Rates and Operating Efficiency

For maximum operating efficiency

1.Follow the instructions below for each burn rate for the Burn Rate Air Control. Figure 10.1.

2.Burn dry, well-seasoned wood.

Burn Rates

1. Starting a Fire

•Open the Burn Rate Air Control by raising it all the way to the top for the High setting.

•The blower tends to cool the appliance. Leave the blower off until the burn is well established, i.e., 30 minutes.

•After loading the appliance with wood and starting the fire, set the Burn Rate Air Controls to the desired setting by following the burn rate instructions below.

2. High Burn Rate - Maximum Heat* - 30,000+ BTU/hr

•Raise the Burn Rate Air Control all the way up until it stops (top marker) to a fully open position.

•Be sure and monitor the fire closely while in this setting to avoid overfiring your stove.

3. Medium-High Burn Rate* - 15,000 to 30,000 BTU/hr

•Raise the Burn Rate Air Control to the Medium High marker. Blower may remain on.

4. Medium-Low Burn Rate* - 10,000 to 15,000 BTU/hr

•Raise the Burn Rate Air Control to the Medium marker. Leave the blower off until the burn is well established, i.e., 30 minutes.

5. Low Burn Rate* - Below 10,000 BTU/hr

•Leave the Burn Rate Air Control at the bottom marker. Leave the blower off until the burn is well established, i.e., 30 minutes.

*NOTE: These are approximate settings, and will vary with type of wood or chimney draft. Due to altitude and other environmental circumstances, this operational information is a guideline only.

Figure 10.1 - Burn Rate Air Control

10

Heatilator • ECO-WINS18 • 7065-132B • August 29 2011

Page 9 Page 11
Page 10
Image 10
Heatiator ECO-WINS18 owner manual Burn Rate Air Control, Burn Rates and Operating Efficiency
Page 9 Page 11

ECO-WINS18 specifications

The Heatiator ECO-WINS18 is a cutting-edge heating solution designed to elevate warmth and comfort in residential and commercial spaces. This innovative unit embodies modern technology, efficiency, and user-centric design, making it a noteworthy choice for anyone in the market for a reliable heating system.

One of the standout features of the ECO-WINS18 is its advanced energy efficiency. This unit boasts a high efficiency rating, significantly reducing energy consumption while delivering powerful heating capabilities. This translates to lower energy bills and a reduced carbon footprint, aligning with growing environmental consciousness among consumers.

The ECO-WINS18 employs a dual heating system that includes both convection and radiant heat technologies. This hybrid approach ensures rapid heat distribution throughout the room, providing consistent warmth while eliminating cold spots. The convection component circulates warm air, while the radiant heat warms objects and surfaces directly, creating a cozy atmosphere.

User convenience is a priority in the design of the ECO-WINS18. It comes equipped with a user-friendly digital thermostat that allows precise temperature control with ease. Additionally, the unit features programmable settings, enabling users to customize heating schedules to suit their lifestyle. This not only enhances comfort but also promotes energy savings.

Safety is a critical consideration in any heating appliance, and the ECO-WINS18 excels in this area as well. It includes multiple safety features such as overheat protection and a tip-over switch that automatically shuts the unit down if it is accidentally knocked over. This ensures peace of mind for users, especially in homes with children and pets.

The sleek and modern design of the ECO-WINS18 allows it to blend seamlessly with various decors, making it an aesthetic addition to any room. The compact size of the unit makes it easy to install, and it can be used as a standalone piece or integrated with existing heating systems.

In summary, the Heatiator ECO-WINS18 stands out for its superior energy efficiency, dual heating technology, user-friendly controls, and safety features. Its modern design not only enhances interior aesthetics but also offers practical functionality. For those seeking an effective and reliable heating solution, the ECO-WINS18 is a wise investment that promises comfort and efficiency for years to come.
Top Page Image Contents