G. Tools And Supplies Needed

Before beginning the installation be sure the following tools and building supplies are available:

7/16 Socket

Framing materia

Reciprocating saw

High temp caulking material l

Pliers

Gloves

Hammer

Framing square

Phillips screwdriver

Electric drill and bits

Flat blade screwdriver

Safety glasses

Plumb line

Tape measure

Level

 

Wire Cutters to remove from pallet

1/2-3/4 in. length, #6 or #8 self-drilling screws Misc. screws and nails

H. Fire Safety

To provide reasonable fire safety, the following should be given serious consideration:

1.Install at least one smoke detector on each floor of your home to ensure your safety. They should be located away from the heating appliance and close to the sleeping areas. Follow the smoke detector manufacturer’s placement and installation instructions, and be sure to maintain regularly.

2.A conveniently located Class A fire extinguisher to contend with small fires resulting from burning embers.

I. Inspect Appliance and Components

•Remove appliance and components from packaging and inspect for damage.

•Vent system components and surrounds are shipped in separate packages.

•Report to your dealer any parts damaged in shipment.

•Read all the instructions before starting the installation. Follow these instructions carefully during the installation to ensure maximum safety and benefit.

Pre-Burn Check List

1.Place the appliance in a location near the final installation area and follow the procedures below:

2.Open the appliance and remove all the parts and articles packed inside the Component Pack. Inspect all the parts and glass for shipping damage. Contact your dealer if any irregularities are noticed.

3.All safety warnings have been read and followed.

4.This Owner’s Manual has been read.

5.Floor protection requirements have been met.

6.Venting is properly installed per vent manufacturing instructions.

7.The proper clearances from the appliance and chim- ney to combustible materials have been met.

8.The masonry chimney is inspected by a professional and is clean, or the factory built metal chimney is installed according to the manufacturer’s instruc- tions and clearances.

9.The chimney meets the required minimum height.

10.All labels have been removed from the glass door.

11.Plated surfaces have been wiped clean, if appli- cable.

12.A power outlet is available nearby for use of the blower assembly.

WARNING

Fire Risk.

Inspect appliance and components for damage.

Damaged parts may impair safe operation.

•Do NOT install damaged components.

•Do NOT install incomplete components.

•Do NOT install substitute components.

Report damaged parts to dealer.

Heatilator • ECO-WINS18 • 7065-132B • August 29 2011

29

Page 28 Page 30
Page 29
Image 29
Heatiator ECO-WINS18 owner manual Tools And Supplies Needed, Inspect Appliance and Components
Page 28 Page 30

ECO-WINS18 specifications

The Heatiator ECO-WINS18 is a cutting-edge heating solution designed to elevate warmth and comfort in residential and commercial spaces. This innovative unit embodies modern technology, efficiency, and user-centric design, making it a noteworthy choice for anyone in the market for a reliable heating system.

One of the standout features of the ECO-WINS18 is its advanced energy efficiency. This unit boasts a high efficiency rating, significantly reducing energy consumption while delivering powerful heating capabilities. This translates to lower energy bills and a reduced carbon footprint, aligning with growing environmental consciousness among consumers.

The ECO-WINS18 employs a dual heating system that includes both convection and radiant heat technologies. This hybrid approach ensures rapid heat distribution throughout the room, providing consistent warmth while eliminating cold spots. The convection component circulates warm air, while the radiant heat warms objects and surfaces directly, creating a cozy atmosphere.

User convenience is a priority in the design of the ECO-WINS18. It comes equipped with a user-friendly digital thermostat that allows precise temperature control with ease. Additionally, the unit features programmable settings, enabling users to customize heating schedules to suit their lifestyle. This not only enhances comfort but also promotes energy savings.

Safety is a critical consideration in any heating appliance, and the ECO-WINS18 excels in this area as well. It includes multiple safety features such as overheat protection and a tip-over switch that automatically shuts the unit down if it is accidentally knocked over. This ensures peace of mind for users, especially in homes with children and pets.

The sleek and modern design of the ECO-WINS18 allows it to blend seamlessly with various decors, making it an aesthetic addition to any room. The compact size of the unit makes it easy to install, and it can be used as a standalone piece or integrated with existing heating systems.

In summary, the Heatiator ECO-WINS18 stands out for its superior energy efficiency, dual heating technology, user-friendly controls, and safety features. Its modern design not only enhances interior aesthetics but also offers practical functionality. For those seeking an effective and reliable heating solution, the ECO-WINS18 is a wise investment that promises comfort and efficiency for years to come.
Top Page Image Contents