9 Appliance Set-up

A. Outside Air Kit Installation

A source of air (oxygen) is necessary in order for combustion to take place. Whatever combustion air is consumed by the fire must be replaced. Air is replaced via air leakage around win- dows and under doors. In homes that have tightly sealed doors and windows, an outside air source is needed. An optional Out- side Air system is available.

Outside Air Installation Instructions

1.Remove the Rear Outside Air Cover Plate on outer can and discard and reuse 2 screws. Figure 39.1.

2.Install Front Outside Air Plate using 2 screws from the Rear Plate. (This part is located in the component pack)

3.Ensure existing acces hole in fireplace will not be covered by the outer can. Existing outside air intake hole may be under at the rear or side of outer can. Outside air may also enter down existing chimney chase in some situations.

4.Install appliance.

Outside Air Kit Option

1.Remove the outside air cover plate B on outer can and dis- card. Figure 39.1.

2.Install Front Outside Air Plate using 2 screws from the Rear Plate. (This part is located in the component pack)

3.Install optional flex adapter to outer can with the same screws. Do not use plastic wire ties that come with the kit as they will melt. NOTE: You may need to install the flex pipe into the firebox first depending on installation. Attach flex to adapater with at least 2 screws.

4.Ensure existing access hole in fireplace is sufficient to feed the 4 inch flex.

WARNING

Fire Risk.

Asphyxiation Risk.

Do not draw outside combustion air from:

•Wall, floor or ceiling cavity

•Enclosed space such as an attic or garage

•Close proximity to exhaust vents or

chimneys

Fumes or odor may result

WARNING

Asphyxiation Risk.

Outside air inlet must be located to prevent blockage from:

•Leaves, snow, ice or other debris Block may cause combustion air starvation

Smoke spillage may set off alarms or irritate sensitive indi- viduals.

WARNING

Asphyxiation Risk.

Length of outside air supply duct shall NOT exceed the length of the vertical height of the exhaust flue.

•Fire will not burn properly

•Smoke spillage occurs when door is opened due to air starvation.

5.After sliding can into fireplace, feed flex into cut opening to obtain outside combustion air.

6.Install appliance.

Rear Outside Air Cover Plate

Front Outside Air Cover Plate

Optional Outside

Air Venting Kit

OAK-ACC

Figure 39.1

Heatilator • ECO-WINS18 • 7065-132B • August 29 2011

39

Page 38 Page 40
Page 39
Image 39
Heatiator ECO-WINS18 owner manual Appliance Set-up, Outside Air Kit Installation, Outside Air Installation Instructions
Page 38 Page 40

ECO-WINS18 specifications

The Heatiator ECO-WINS18 is a cutting-edge heating solution designed to elevate warmth and comfort in residential and commercial spaces. This innovative unit embodies modern technology, efficiency, and user-centric design, making it a noteworthy choice for anyone in the market for a reliable heating system.

One of the standout features of the ECO-WINS18 is its advanced energy efficiency. This unit boasts a high efficiency rating, significantly reducing energy consumption while delivering powerful heating capabilities. This translates to lower energy bills and a reduced carbon footprint, aligning with growing environmental consciousness among consumers.

The ECO-WINS18 employs a dual heating system that includes both convection and radiant heat technologies. This hybrid approach ensures rapid heat distribution throughout the room, providing consistent warmth while eliminating cold spots. The convection component circulates warm air, while the radiant heat warms objects and surfaces directly, creating a cozy atmosphere.

User convenience is a priority in the design of the ECO-WINS18. It comes equipped with a user-friendly digital thermostat that allows precise temperature control with ease. Additionally, the unit features programmable settings, enabling users to customize heating schedules to suit their lifestyle. This not only enhances comfort but also promotes energy savings.

Safety is a critical consideration in any heating appliance, and the ECO-WINS18 excels in this area as well. It includes multiple safety features such as overheat protection and a tip-over switch that automatically shuts the unit down if it is accidentally knocked over. This ensures peace of mind for users, especially in homes with children and pets.

The sleek and modern design of the ECO-WINS18 allows it to blend seamlessly with various decors, making it an aesthetic addition to any room. The compact size of the unit makes it easy to install, and it can be used as a standalone piece or integrated with existing heating systems.

In summary, the Heatiator ECO-WINS18 stands out for its superior energy efficiency, dual heating technology, user-friendly controls, and safety features. Its modern design not only enhances interior aesthetics but also offers practical functionality. For those seeking an effective and reliable heating solution, the ECO-WINS18 is a wise investment that promises comfort and efficiency for years to come.
Top Page Image Contents