Henny PennyModel
| Every 3 Months: | |
(Continued) | 1. | Remove all electrical power supplied to the unit by unplugging |
|
| the power cord from the wall, or by turning off the wall circuit |
|
| breaker. |
| 2. | Remove all product from the unit. |
| 3. | Remove the riser and trays from the unit and clean with |
|
| soap and water at a sink. |
| 4. | Clean interior surfaces with a soft cloth, soap and water. |
|
| Do not use steel wool, other abrasive cleaners or |
|
| cleaners/sanitizers containing chlorine, bromine, iodine |
|
| or ammonia chemicals, as these will deteriorate the |
|
| stainless steel, and glass material, and shorten the life of |
|
| the unit. |
|
| Do not use a water jet (pressure sprayer) to clean the |
|
| unit, or component failure could result. |
| 5. | Clean around light fixtures with a soft, damp cloth. |
| 6. | Reconnect the electrical power, and unit is now ready for |
|
| operation. |
If the power cord is damaged, have a qualified service technician replace it to prevent electrical shock or property damage.
303 |