HHB comm CDR-830 Finalizing a disc, Resetting the, recorder

4 Getting started

2

SCROLL DISPLAY MONITOR

ERASE FINALIZE

CD TEXT

3

DIGITAL	ANALOG
REC LEVEL	REC LEVEL
TEXT
SYNCHRO

PROFESSIONAL

Finalizing a disc

Before you can play a CD-R on an ordinary CD player, the disc must go through a process called finalization. Once finalized, a CD-R disc is no longer recordable, nor will you be able to set or clear skip IDs. Finalization is not reversible for CD-Rs so be absolutely sure that everything on the disc is the way you want it before you start.

CD-RW discs can also be finalized, although you can still erase the disc afterwards and reuse it, so it's not anything like as final as it is with a CD-R disc. A finalized CD-RW disc can only be played on a CD player that is compatible with CD-RW discs (currently only recent players).

Caution!

Finalization takes a couple of minutes. During this time never switch off the power to the unit— the disc may become unusable as

a result.

1Load the CD-R or CD-RW you want to finalize.

Check that the disc is free from dust, dirt and scratches—if necessary, clean the disc, following the guidelines on page 7.

2 Press FINALIZE.

The FINALIZE indicator lights. After a short while you should see a display something like this:

The display shows how long finalization will take—the exact time taken depends on the disc.

Press 7 here to cancel finalization.

3 Press 8 (6 on the front panel) to start finalization.

Finalization takes about two minutes; you'll see how long there is remaining in the display. The player stops when finished.

For a CD-R, the CD-R indicator now changes to simply CD.

For a CD-RW, the finalize indicator lights in the display.

None of the controls on the player or the remote have any effect during finalization. If, however, the recorder hasn't managed to finalize the disc within 10 minutes, you can abort the operation by pressing 7. If you do this, the disc won't be playable on an ordinary CD player.

				Resetting the
	2			recorder
				This erases all saved text
				information and returns the
				recorder to its factory settings:
	SCROLL	DISPLAY	MONITOR	• Copy-bit setting - PERMIT
	ERASE	FINALIZE		• Fade length - 5 SEC
	CD TEXT			• Time increment recording - OFF
				• Silence threshold level - −54 dB
				• Digital volume - 0.0 dB
1	2			• Balance - CENTER
	DIGITAL		ANALOG
	REC LEVEL		REC LEVEL
	TEXT
	SYNCHRO
		PROFESSIONAL

1Eject the disc if there is one in the recorder.

2Hold down SCROLL then press MENU/DELETE.

Note: If you have finished all the recording you would like to do, and have set CD text for a disc, make sure to finalize the CD before resetting.

26