
6 More recording features
1
SCROLL DISPLAY TITLE/MODE MONITOR
TRACK NO.
WRITE
ERASE | FINALIZE | AUTO | INPUT |
MANUAL | SELECTOR |
CD TEXT
2
DIGITAL | ANALOG |
REC LEVEL | REC LEVEL |
TEXT
SYNCHRO
PROFESSIONAL
3
1
SCROLL DISPLAY TITLE/MODE MONITOR
TRACK NO.
WRITE
ERASE | FINALIZE | AUTO | INPUT |
MANUAL | SELECTOR |
CD TEXT
DIGITAL | ANALOG |
REC LEVEL | REC LEVEL |
TEXT
SYNCHRO
PROFESSIONAL
When a finalized disc is loaded
Be careful: When you erase the TOC, the CD text information for the disc is also copied to memory for editing purposes, erasing the oldest text information stored (as explained on page 30).
1 Press ERASE.
The display shows ERASE TOC?.
Press 7 to cancel erase here.
2Use the jog dial or 4 and ¢ buttons on the remote control to change the erase
option.
Switch between:
ERASE TOC? – erase the table of contents (returns disc to a non- finalized state)
ERASE ALL? – erase all tracks
3 Press 8 (6 on the front panel) to start erasing.
The function indicator lights and the display shows ERASE, and the time remaining to completion.
You can halt this erase process by holding down the 7 button for 10 seconds.
Reinitializing a disc
1 Press and hold ERASE for about four seconds.
The recorder prompts you to confirm with the message
INITIALIZE?.
Press 7 to cancel all disc erase here.
2 Press 8 (6 on the front panel) to start erasing.
The process takes about 40 minutes, depending on the disc. During this time, the display shows ERASE, followed by the remaining time to completion.
You can halt this erase process by holding down the 7 button for 10 seconds.
2
38