1

SCROLL

DISPLAY

TITLE/MODE

MONITOR

 

 

TRACK NO.

 

 

 

WRITE

 

ERASE

FINALIZE

AUTO

INPUT

MANUAL

SELECTOR

CD TEXT

2

DIGITAL

ANALOG

REC LEVEL

REC LEVEL

TEXT

SYNCHRO

PROFESSIONAL

3

Erasing a CD- RW disc

Although more expensive than CD-R discs, the great advantage of CD-RW is that the discs can be erased and reused. Various erase options are available depending

on whether the disc has been finalized.

A third, special option, erases (re- initializes) the whole disc. This process takes quite a long time to complete and should be used for recovering damaged discs, not for erasing tracks from a healthy disc.

Caution!

Never switch off the power during CD-RW erasing - your disc may become unusable.

If the message CHECK DISC appears any time during any erase process, press 0, take out the disc, clean it, then try the erase command again.

Be sure to remove the disc from the recorder before switching off the power, otherwise the erase operation will not be completed.

6 More recording features

When a non-finalized disc is loaded

1 Press ERASE.

The display shows ERASE LAST?.

•Press 7 to cancel last track erase here.

2Use the jog dial or press 4 and ¢ on the remote control to change the erase

option.

Switch between:

ERASE LAST? – erase just the last track

ERASE ALL? – erase all tracks

ERASE 02–[LAST TRACK]? – erase track 2 and all subsequent tracks

ERASE 03–[LAST TRACK]? – erase track 3 and all subsequent tracks

Keep turning the jog dial or press

4and ¢ on the remote control to change the number of tracks to erase.

3 Press 8 (6 on the front panel) to start erasing.

The process takes just a few seconds. During this time, the function indicator lights.

37