HHB comm DRM85 Connecting a FlashMic with low batteries to a computer

•Drag-and-drop the required sound files to their new location in the normal way.

•Unmount the FlashMic. This action is performed by double-clicking the USB

device icon in the status bar. This will open the Safely Remove Hardware dialogue box, in which external hardware connected to the PC’s USB ports will be listed. Select USB Mass Storage Device by clicking on it, then click STOP.

Select the DRM-85 and click OK. This step will ensure that no data is lost by simply disconnecting the mic.

•It is now safe to disconnect the FlashMic. After disconnection, it can be switched off.

ENGLISH

Connecting a FlashMic with low batteries to a computer.

It is generally recommended that the FlashMic should not be connected to a computer if the batteries are running low. If the batteries do go flat during data transfer, the FlashMic will continue to perform the transfer, as it will also be powered via the USB connection. However, in this condition data loss may occur if the USB cable is unplugged without the FlashMic first being unmounted from the computer. Therefore unmounting the FlashMic (as described in the transfer procedures above) is recommended at all times, but is essential if the batteries are low.

En.15