HHB comm DRM85 RECLEV, RVOL34, RV AGC, Recording Level Menu

Recording Level Menu

This menu will not be available if ‘Enable Configuration changes in DRM’ was set to ‘No’ when the configuration file was defined in FlashMic Manager.

The audio level used during recording will be that defined within FlashMic Manager for the preset being used. The Recording Level menu permits this level to be altered.

To enter the Recording Level Menu, enter MENU mode by pressing the M/STOP button, and then make SHORT DOWN TURNs of the jogswitch until the display shows RECLEV.

RECLEV

Record Level Menu Display

Select this with a SHORT PRESS, and the display shows either RVOLnn - where nn = the

current level – or RV AGC if automatic adjustment of recording level was defined for the current preset.

The recording level can now be adjusted with SHORT UP or DOWN TURNS. A SHORT PRESS selects the new level.

ENGLISH

RVOL34

Record Level Setting

The units used are in dBs; 01 = min, 40 = max.

When the record level is reduced to ‘zero’, the AGC system is selected.

In this mode, FlashMic automatically adjusts recording level according to the sound level. In most situations, this ensures that a recording of usable level will be made, but as with all automatic gain systems, a degree of background noise “pumping” may be audible on the recording.

RV AGC

Record Level Set To AGC

It is also possible to adjust the FlashMic’s recording level whilst recording. See Adjusting Record Level on page 11.

Note that the record level always resets to the last value used when the FlashMic is switched on, and not to the value set as part of the preset.

En.19