Recording Mode Menu
This menu will not be available if ‘Enable Configuration changes in DRM’ was set to ‘No’ when the configuration file was defined in FlashMic Manager.
The Recording Mode menu permits selection of an alternative digital recording format to that determined by the currently selected preset.
A total of six recording formats are available within FlashMic; two file formats at each of three sample rates. The formats are:
FILE TYPE | SAMPLE | DISPLAY | MAXIMUM | |
RATE | RECORDING TIME | |||
|
| |||
BWF files (uncompressed) | 48kHz | LIN48K | 3hr | |
|
|
|
| |
BWF files (uncompressed) | 44.1kHz | LIN44K | 3hr 15min | |
|
|
|
| |
BWF files (uncompressed) | 32kHz | LIN32K | 4hr 30min | |
|
|
|
| |
MPEG1 (Layer 2) files | 48kHz | MP48K | 12hr 15min | |
|
|
|
| |
MPEG1 (Layer 2) files | 44.1kHz | MP44K | 14hr 40min | |
|
|
|
| |
MPEG1 (Layer 2) files | 32kHz | MP32K | 18hr 25min | |
|
|
|
|
The choice of recording mode will usually be determined by the onward programme production chain.
To enter the Recording Mode Menu, enter MENU mode by pressing the M/STOP button, and then make SHORT DOWN TURNs of the jogswitch until the display
shows R MODE.
Select this with a SHORT PRESS, and the display will show the name of the currently selected recording mode, as listed above. To select a different recording mode, make SHORT UP or DOWN TURNs. The display will show the names of the alternative modes.
When the required recording mode is displayed, a SHORT PRESS on the jogswitch will select it.
R MODE
Record Mode Menu Display
The recording mode selected will be that used for subsequent recordings until a different recording mode or preset is selected.
Note that any recordings already in the FlashMic’s memory will remain at whatever mode was applicable when they were made.
19