Batteries

The FlashMic requires two AA-size batteries. Either 1.5v alkaline or 1.2v NiMH (nickel metal hydride) rechargeable batteries may be used.

Batteries of at least 1500mAh capacity are recommended.

!Do not use zinc chloride batteries.

Inserting Batteries

Hold the FlashMic in one hand and unscrew the rear section (the section with the display and operating controls) with the other.

Slide the rear section back as far as it will go.

Open the hinged plastic battery compartment cover.

Insert the two batteries oriented as shown on the compartment cover.

!The two batteries must point the same way.

!Always change both batteries at the same time, and always use two batteries of the same brand and type. NEVER mix alkaline and rechargeable batteries.

Close the cover, push the rear section back over the compartment, and screw up tight.

Note: If changing alkaline batteries, dispose of the old ones in a responsible manner

– always observe local environmental guidelines.