Fault Possiblecause Remedy
Thepower tool doesn’t
achievefull power.
Theextension cord’s conductor
crosssection is inadequate.
Usean extension cord with an ad-
equateconductor cross section.
(Pleaserefer to the “Description”
section.)
Thecontrol switch is not pressed
fully. Pressthe control switch as far as it
willgo.
Thedrill bit doesn’t rotate. Thefunction selector switch is not
engagedor is in the “Chiseling” or
“Chiseladjustment” position.
Whenthe motor has stopped, turn
thefunction control switch to the
“Drillingwithout hammering” or
“Hammerdrilling” position.
Thedrill bit can’t be released. Thechuck is not pulled back fully. Pullthe chuck back as far as it will
goand remove the insert tool.
Thedrill bit makes no pro-
gress. Theforward/reverse switch is set
toreverse rotation.
Setthe forward/reverse switch to
forwardrotation.
10. Disposal
Most of the materials from which Hilti power tools or appliances are manufactured can be recycled. The
materialsmust be correctly separated before they can be recycled.In many countries, Hiltihas already made
arrangementsfor taking back your old power tools or appliances for recycling. Please ask your Hilti customer
servicedepartment or Hilti representative for further information.
11. Manufacturer’s warranty - tools
Hiltiwarrants that the tool supplied is free of defects
in material and workmanship. This warrantyis valid
solong as the tool is operated and handled correctly,
cleanedand serviced properly and in accordance with
the Hilti Operating Instructions, and the technical
system is maintained. This means that only original
Hilticonsumables, components and spare parts may
beused in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only over the entire
lifespanof the tool. Parts requiring repair or replace-
ment as a result of normal wear and tear are not
coveredby this warranty.
Additionalclaims are excluded, unless stringent na-
tional rules prohibit such exclusion. In particular,
Hiltiis not obligated for direct, indirect,incidental
or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or
inability to use the tool for any purpose. Implied
warranties of merchantability or fitness for a par-
ticularpurpose are specifically excluded.
For repair or replacement, send the tool or related
parts immediately upon discovery of the defect to
the address of the local Hilti marketing organization
provided.
This constitutes Hilti’s entire obligation with regard
to warranty and supersedes all prior or contempor-
aneous comments and oral or written agreements
concerningwarranties.
en
12