Obligation signs
en | Wear eye | Wear a hard | Wear ear | Wear | |
protection | hat | protection | protective | ||
|
gloves
Wear
breathing protection
Symbols
Read the | Return waste | Drilling | Hammer |
operating | material for | without | drilling |
instructions | recycling. | hammering |
|
before use |
|
|
|
Chiseling | Chisel position | Volts | Amps |
| adjustment |
|
|
Alternating | Hertz | Rated speed | Revolutions | ||
current |
|
|
| under no load | per minute |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Diameter | Double | Reverse | Forward |
| insulated | rotation | rotation |
Location of identification data on the power tool
The type designation can be found on the type iden- tification plate and the serial number on the side of the motor housing. Make a note of this data in your operating instructions and always refer to it when making an enquiry to your Hilti representative or service department.
Type:
Serial no.:
2. Description
2.1 Use of the product as directed
The power tool is an
The power tools are designed for drilling in concrete, masonry, gypsum board (drywall), wood, plastic and metal. The power tool can also be used for light chiseling work on masonry and surface finishing on concrete. Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The power tool is designed for professional use. The power tool may be operated, serviced and repaired only by authorized, trained personnel. This personnel must be informed of any special hazards that may be encountered.
The power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or when used not as directed.
The working environment may be as follows: construction site, workshop, renovation, conversion or new construction. The power tool may be operated only when connected to a power supply providing a voltage and frequency in compliance with the information given on its type identification plate.
Changes or modifications to the power tool are not permissible.
To avoid the risk of injury, use only genuine Hilti accessories and insert tools.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
2
