Hilti TE 7-C 3. Insert tools, accessories, 4. Technical data

2.9Using extension cords outdoors

When working outdoors, use only extension cords that are approved and correspondingly marked for this

application.

2.10Using a generator or transformer

Thispower tool may be powered by a generator or transformer which fulfills the following conditions: The unit

mustprovide a power output in watts of at least twice the value printed on the rating plate on the power tool.

Theoperating voltage must remain within +5% and -15% of the rated voltage at all times, frequency must bein

the50 – 60 Hz range and never above 65 Hz, and the unit must be equipped with automatic voltage regulation

andstarting boost.

Neveroperate other power tools or appliances fromthe generator or transformer at the same time. Switching

other power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in

damageto the power tool.

3. Insert tools, accessories

Designation Description

Chucks TE‑CCLICK

Hammerdrill bits Ø5…28mm

Formingand installation drill bits Ø5…20mm

Lightweightpercussion core bits Ø25…68 mm

Multipurposehole saws Ø25…82mm, hexagonal

Pointedchisel C-typeconnection end

Flatchisel C-typeconnection end

Shapedchisels C-typeconnection end

Anchor-settingtools C-typeconnection end

Quick-releasechuck for wood and metal drill bits Forsmooth or hex. shank

Key-typechuck Withsmooth or hex. shank

Wooddrill bits Ø3…20 mm

Metaldrill bits ØMax.13 mm

Metaldrill bits / stepped drill bits Ø5…22mm

Designation Description

Dustmodule TEDRS-M

Angularchuck C-type connection end

4. Technical data

Rightof technical changes reserved.

NOTE

Thepower tool is available in various voltage ratings. Pleaserefer to the power tool’s type identification plate

fordetails of its rated voltage and rated input power.