2.2 Chucks
TE‑C CLICK chuck
2.3 Switches
Speed control switch for smooth starting.
Function selector switch:
Drilling without hammering
Hammer drilling
Chisel adjustment (18 positions)
Chiseling
2.4 Grips
2.5Protective feature Mechanical slip clutch
2.6Lubrication
Oil lubrication
2.7Items supplied as standard
1Power tool
1TE‑C CLICK chuck
1Side handle with depth gauge
1Operating instructions
1Hilti toolbox
1Cleaning cloth
1Grease
2.8Using extension cords
Use only extension cords of a type approved for the application and with conductors of adequate cross section. The power tool may otherwise loose performance and the extension cord may overheat. Check the extension cord for damage at regular intervals. Replace damaged extension cords.
Recommended minimum conductor cross section and max. cable lengths
Conductor cross sec- | 1.5 mm² | 2.5 mm² | 3.5 mm² | 14 AWG | 12 AWG | |
tion | ||||||
|
|
|
|
| ||
|
|
|
|
|
| |
Mains voltage 100V |
|
| 50 m |
|
| |
Mains voltage 110- | 30 m | 50 m |
| 100 ft | 150 ft | |
120 V |
|
|
|
|
| |
Mains voltage 220- | 75 m | 100 m |
|
|
| |
240 V |
|
|
|
|
|
Do not use extension cords with 1.25 mm² or 16 AWG conductor cross sections.
en
3
