Table of Contents
Warnings | . 2 | Motor Start Board | 23 |
Component Identification and Function | . 5 | Power Supply Cord | 23 |
Setup | . 6 | ON/OFF Switch | 23 |
Operation | . 7 | Drive Housing, Connecting Rod, Crankshaft | 24 |
Startup | . 9 | Pressure Control | 26 |
Shutdown and Care | 11 | Pressure Transducer | 27 |
Flushing | 12 | Drain Valve | 28 |
Troubleshooting | 13 | Technical Data | 29 |
Motor Test | 17 | Dimensions | 29 |
General Repair Information | 18 | Phone Number | 29 |
Motor Brush | 19 | Sprayer Parts Drawing | 30 |
Displacement Pump Repair | 21 | Sprayer Parts List | 31 |
Motor | 22 | Graco Warranty and Disclaimers | 34 |
Symbols
Warning Symbol
WARNING
This symbol alerts you to the possibility of serious injury or death if you do not follow the instructions.
Caution Symbol
CAUTION
This symbol alerts you to the possibility of damage to or destruction of equipment if you do not follow the instructions.
WARNING
FIRE AND EXPLOSION HAZARD
Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.
DIf there is any static sparking or you feel an electric shock while using this equipment, stop spray- ing immediately. Do not use the equipment until you identify and correct the problem.
DProvide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid being sprayed.
DKeep the spray area free of debris, including solvent, rags, and gasoline.
DElectrically disconnect all equipment in the spray area.
DExtinguish all open flames or pilot lights in the spray area.
DDo not smoke in the spray area.
DDo not turn on or off any light switch in the spray area while operating or if fumes are present.
DDo not operate a gasoline engine in the spray area.
DUse only with a grounded outlet that matches the grounded plug of this equipment.
