Setup
Grounding
WARNING
Improper installation or alteration of the grounding plug will result in a risk of electric shock, fire or explosion that could cause serious injury or death.
1.This equipment requires a 120 Vac, 60 Hz, 15A circuit with a grounding receptacle. See Fig. 3.
Grounded
Outlets
Grounding Prong
Fig. 3
2.Do not alter the ground prong or use an adapter.
3.A 12 AWG gauge, 50 ft extension cord may be used with this equipment.
Operation
How to use the gun trigger safety
When engaged, the gun safety latch prevents the gun from accidental triggering. See Fig. 4.
1Open or drain, position
2Closed, or spray position
1
2
WARNING
INJECTION HAZARD
If the gun still sprays when the gun trigger safety is locked, repair the gun. See manual 308645, supplied.
Gun safety latch shown engaged
Gun safety latch shown disengaged
1
2
1
2
Fig. 5 | 04646 |
|
How to use the pressure control.
The pressure control controls the motor operation so the sprayer maintains constant fluid pressure at the pump outlet. Turn the pressure control knob fully counterclockwise to obtain the minimum setting. Turn the knob clockwise to increase pressure. See Fig. 6.
Fig. 4 | 05964 |
|
How to use the pressure drain valve.
Use the pressure drain valve to relieve fluid pressure from the pump and to help prime the pump. If the valve senses an over pressure condition, it opens automati- cally to relieve fluid pressure. If this happens, stop spraying immediately, shut off and unplug the sprayer. Determine the cause of the problem and correct it before operating the sprayer again. Refer also to the Troubleshooting , page 13. See Fig. 5.
02824A
Fig. 6
3875 7
