Operation
How to use the RAC IV tip guard.
WARNING
INJECTION HAZARD
To reduce the risk of serious injury, whenever you are instructed to relieve pressure, follow the Pressure Relief
Procedure on page 9.
The tip guard alerts you to the risk and helps prevent placing any part of the body close to the spray tip. The tip guard also adjusts the vertical or horizontal spray pattern. See Fig. 9. The tip guard holds a reversing spray tip. The tip is in the spraying position when the tip handle points forward. See Fig. 7.
Clean the front of the tip frequently during the day's operation. First, follow the Pressure Relief Procedure on page 9.
12
Tip handle shown in
1spraying position.
2Turn handle 180_, trigger gun to clear clog
04647
Fig. 7
How to remove a tip clog.
1.Release the gun trigger. Lock the safety latch. Rotate the RAC IV tip handle 180_. See Fig. 7.
2.Unlock the safety latch. Trigger the gun into a pail or onto the ground to remove the clog.
3.Lock the safety latch. Rotate the tip handle to the spraying position.
4.If the tip is still clogged, lock the safety latch, shut off and unplug the sprayer, and open the pressure drain valve to relieve pressure. Clean the spray tip as shown in manual 308644, supplied.
83875
