FRONT PANEL CONTROLS FOR 32FX41B AND 32UX51B

- 11 -

Phono ConnectorS-Video (Super Video) Connector

 

Used on all standard video and audio

This connector is used on camcorders, VCRs and

cables which connect to inputs and

laserdisc players with an S-Video feature in place of the

outputs located on the television's rear

standard video cable to produce a high quality

picture.

 

 

jack panel and front control panel.

 

 

ANTENNA CONNECTIONS

These sets are equipped with one VHF/UHF antenna terminal. The VHF/UHF terminal can be used for normal TV, cable TV (CATV), a TV game, etc.

1. VHF (75 Ohm) antenna/CATV

When using a 75-Ohm coaxial cable system, disconnect the VHF adapter from the VHF 75-Ohm receptacle and connect the outdoor antenna or CATV cable to a VHF 75-Ohm

receptacle.

2. VHF (300 Ohm) antenna/UHF antenna

When using a 300-Ohm twin lead from an outdoor antenna disconnect the (VHF or UHF) indoor antenna leads from screws of the (VHF or UHF) adapter and connect outdoor (VHF or UHF) antenna leads to these screws of a (VHF or UHF) adapter.

3. When both VHF and UHF antennas are connected

Attach an optional ANTENNA MIXER to the TV antenna terminal and connect the cables to the

ANTENNA MIXER.

Notes:

1.If an outdoor antenna/CATV is used, disconnect the indoor antenna. Ghosting and poor reception may result if both the indoor and outdoor antennas/CATV are connected at the same time.

2.Consult your dealer or service store for the ANTENNA MIXER and (VHF or UHF) adaptor.

3.The special converter (decoder) will be supplied by the cable company.

FRONT PANEL CONTROLS FOR 32FX41B AND 32UX51B

FRONT VIEW