
TIPS ON REAR PANEL CONNECTIONS | - 13 - |
The VHF/UHF terminal can be used for normal TV, cable TV (CATV), a video game, etc.
2 Antenna Inputs (Except 36CX35B)The remote control allows you to switch between two separate
The INPUT button will step through each video source and antenna source input each time it is pressed. Use the audio and video inputs to connect external devices, such as VCRs, camcorders, laserdisc players, etc. (If you have mono sound, insert the audio cable into the left channel jack.)
4 Monitor Out (Except 36CX35B)These jacks provide fixed audio and video signals which are used for recording.
5 Audio toThese jacks provide variable audio output to a separate stereo amplifier. With this connection, the audio to the stereo can be controlled by the television's main volume. Use these jacks for the SURROUND Left and Right channels. (See page 20.)
6Input 1 provides
TIPS ON REAR PANEL CONNECTIONS
The
If your device has only one audio output (mono sound), connect it to the left audio jack on the TV.
Refer to the operating guide of your other electronic equipment for additional information on connecting your
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot read its own video or line output (INPUT: 1 in the example on page 15 or 16). Refer to your VCR operating guide for more information on line
REAR PANEL CONNECTIONS (36CX35B ONLY)
Rear Panel Connections Illustration
Typical full feature
REAR PANEL CONNECTIONS (EXCEPT 36CX35B)
Rear Panel Connections Illustration
Typical full feature
EXTERNAL CONNECTIONS
CONNECTING EXTERNAL AUDIO AMPLIFIERTo control the audio level of an external audio amplifier with the remote control, connect the system as shown below.