PICTURE-IN-PICTURE (PIP)

- 22 -

3 SWAP button

If you wish to switch what is being shown on the main picture to the sub-picture, press the SWAP button.

NOTE: The SWAP function will not operate if ANT B input is set as the main channel (ANT B input cannot be displayed as a sub-picture.)

Model 36CX35B does not have ANT B input.

4 MOVE button

To move the sub-picture to another corner, press the MOVE button. The sub-picture moves one step counter-clockwise every time the MOVE button is pressed. (Example below illustrates the MOVE operation for initial shipping conditions. If you have customized a PIP position, the MOVE operation may differ slightly from the example.)

It is also possible to customize the PIP position. To do this, wait until the On-Screen Display disappears (after eight seconds) and then use the cursor , , , buttons.

5 FREEZE (FRZ) Button

If you wish to freeze the sub-picture, press the FRZ button. This is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FRZ button again.

6 QUICK FREEZE (FRZ) Button

Press this button without a sub-picture to freeze the picture you are currently viewing. Press this button again to return to normal viewing.